St. Louis Cast Stone Planter

The St. Louis Cast Stone Planter features a broad square shape with clean architectural lines and a substantial presence. Its generous planting area is ideal for shrubs, ornamental grasses, colorful annuals or seasonal arrangements. Shown in Alpine Stone; available finishes may vary.

Dimensions: 38"W x 21.25"H
Base: 19.5"W
Weight: 409 lbs.
Inside Top: 33.25"L x 33.25"W
Inside Bottom: 26"L x 26"W
Inside Height: 10"H
Drainage: One centered drainage hole, approximately 1.25"
Material: Cast Stone (water, sand, stone aggregate and cement)

Care, Maintenance and Planting Instructions

Our cast stone planters are equipped with pre-installed drainage holes to allow excess water to escape. The drainage holes must be kept clear to help maintain the longevity of your planter, especially in climates that experience winter freeze-thaw cycles.

Whenever possible, we recommend raising the planter off the ground by placing two pressure-treated wood strips underneath it. This helps prevent the planter from freezing to the surface below.

Cover the drainage holes with a mesh screen or similar material to prevent soil and debris from clogging the openings. Fill the planter with a well-draining soil mix that will not retain excess water. Cover the soil with decorative mulch or pine bark up to the top rim of the planter to discourage water from pooling on the surface.

To help keep the finish looking like new, spray the planter with a matte clear coat rated for outdoor use before planting. If left untreated, the finish will naturally and gently soften over time.

Care & Maintenance / Warranty Information

Concrete containers do not come with a manufacturer's warranty.

Cover containers with an appropriate outdoor container cover. Do not use a tarp or plastic. Check covers weekly and after storms or heavy snowfall to make sure containers remain protected from moisture.

To help maintain the finish, apply a clear acrylic spray rated for outdoor use once a year.

Quantity Available: