FOUNTAIN, PALLISADES 625#

Shown in Grey Stone (GS). Actual finishes of in-stock items may differ than the one shown. Additional Patina Colors are available for special order.

Dimensions: 37"W x 36"H
Weight: 625 lbs.

Pallisades Fountain Information:
- This fountain holds approximately 12.5 GAL of water.
- This fountain uses an exra-large fountain cover.
- Compatible with a Refill Device and LED kit.
- A special stopper is required to use the refill kit for this fountain. Material: Cast Stone (water, sand, stone aggregate and cement)

Fountain Care & Maintenance

Specific assembly instructions are included with the purchase of each Campania fountain. Please check that these instructions and all fountain parts are included before setting up the fountain.

The following general guidelines should be followed for every fountain set-up:
- The fountain should be set up on a flat, level surface to ensure proper water flow.
- A properly prepared base of gravel, flagstone, or other hardscaping material is preferred to maintain stability.
- Check that the pump works BEFORE assembly by placing it in a bucket of water and operating the pump.
- A fountain pump should only be connected to a properly grounded 110 volt (AC only) GFCI protected receptacle.

Proper care for all cast stone fountains should include the following important tips:
- Consistent filling is required to maintain a proper water level and ensure that the pump remains totally submerged. If the level of water is too low, the pump will be damaged. How often a fountain should be filled depends on water flow and specific weather conditions in which the fountain is running. Appropriate water level is also required for proper fountain performance.
- Keep pump inflow free of debris to insure proper water flow. Periodic cleaning of the pump will extend its life.
- If desired, the fountain may be cleaned with mild soap and a soft bristle brush. DO NOT use bleach as this may affect the patina.
- Algaecides available at pond supply or garden shops can be used to combat the buildup of algae.
- To maintain the finish, we recommend spraying with a clear acrylic spray rated for outdoor use once a year.

Always follow general winter care for fountains as outlined below to extend the life of your birdbath:
- While pumps do come with a one year manufacturer warranty, they must be removed and stored indoors.
- Fountains must be completely drained and dried before the first freeze.
- Fountains must be covered with an appropriate cover, not a tarp or any other type of plastic.
- Covers should be checked weekly or after stormy weather or heavy snowfall because they can shift, exposing bowls to damaging moisture.

Statuary, fountains, and birdbaths do not come with a manufacturer's warranty.

Quantity Available: